The Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg part # LC179013 is only available as a complete unit. If any of the internal components have been damaged you will need to replace the entire leg. view full answer...
Yes, you can use the Valterra Foam Weather Stripping for RV Air Conditioners # A10-1414 to replace the gasket on your old Dometic rooftop unit. I can not stress enough though to not drag the unit when you're swapping these out. It will tear the gasket up and and roof membrane which is a nightmare to fix/replace.
As for the wiring size needed that will depend on the unit but you'd be safe using 10AWG or thicker wiring for the AC power to the unit. view full answer...
Thank you for the photo and information!
It looks like you have the Low Profile LED tail light from Optronics as well as their standard boxed combination trailer tail light. We have both the driver and passenger side lights and the only difference is the driver side lights have a clear lens and extra light underneath (and a bracket for the low profile) to illuminate a license plate.
Low Profile
Driver Side - # RVSTL61
Passenger Side - # RVSTLB60
Combination
Driver Side - # STL15RB
Passenger... view full answer...
If you're able to provide a bit more information about your current landing gear setup on your 2010 Forest River Wildcat, I would be happy to see if we have a rebuild kit or a replacement leg for your landing gear, however without that information, the best I can do is recommend a replacement landing gear system.
The Landing Gear Set w/ Handle # RVLG-8HDL should work great for your Forest River Wildcat! This landing gear has 36-1/2" of total lift, a combined weight capacity of 8,000lbs,... view full answer...
Go To Results